If you want to update the look of your vehicle without expensive mods or permanent changes, customizing your car’s emblems is a great place to start. This guide will show you exactly how to Plasti Dip emblems using a few basic tools and Plasti Dip Aerosol Spray.
Whether you’re going for a blackout badge look or a pop of color, Plasti Dip gives you the flexibility to try new styles and peel them off whenever you’re ready for a change.
Why Use Plasti Dip on Car Emblems?
Plasti Dip is a removable rubber coating that adheres to metal and plastic surfaces. It’s durable, weather-resistant, and easy to apply. Best of all, it peels off cleanly if you want to revert to the original finish.
This makes it the perfect solution for DIY automotive styling. You can try a new color or matte finish without damaging your vehicle or committing to permanent paint.
What You’ll Need
- Plasti Dip Aerosol Spray
- Masking tape or painter’s tape
- Index cards or newspaper for clean edges
- Rubbing alcohol or surface cleaner
- Microfiber cloth
- Optional: Plastic trim tools for badge removal (if doing off-car)
Step-by-Step: How to Plasti Dip Emblems
1. Clean the Surface Thoroughly
Use rubbing alcohol and a microfiber cloth to remove dirt, wax, and oils. The cleaner your surface, the better the adhesion.
2. Mask the Area
Tape around the emblem, then slide index cards between the emblem and body to catch overspray. Create a clean, square masking zone a few inches around the badge.
3. Shake and Spray
Shake the Plasti Dip can for one full minute. Spray 5 to 6 light coats, allowing 15 to 30 minutes of dry time between each layer. Focus on full, even coverage.
4. Remove the Masking
Once the final coat has dried for at least 30 minutes, carefully remove the index cards and tape. Be gentle to avoid lifting the edges of your Plasti Dip.
5. Peel the Edges
Use your fingers or a toothpick to gently lift and peel away any overspray or unwanted areas. The coating should separate cleanly from non-emblem surfaces.
Pro Tips
- If you’re unsure about placement or color, test on a plastic surface first.
- For long-term use, apply more coats to improve durability and ease of removal later.
- Do not wash the emblem for at least 48 hours after application.
A Custom Look Without the Commitment
Now that you know how to Plasti Dip emblems, you’re ready to upgrade your vehicle’s appearance with minimal effort and no permanent changes. Whether you’re going for subtle or bold, this peelable solution puts the power of customization in your hands.
Grab a can of Plasti Dip and start spraying. Your emblems, your style, your way.