Vinyl Leather Repair (VLP®)

Vinyl Leather Repair (VLP^®)

VLP is typically used on vinyl furniture, awnings, tarps, vinyl sheeting, luggage, rainwear, boots, etc. Because of its bonding and tensile strength, VLP also acts as a “back-up” to sewn vinyl seams when applied to the backside of the seam in production.

ATTRIBUTES

Easy to use, air-dry formula dries clear and blends with all colored vinyl
Dissolves the surface of the vinyl and creates an excellent bond when completely dry
A repair made with VLP is stronger than the original vinyl or leather material

Available Colors

Clear

Product FAQ

HOW FAR WILL A CAN OF PLASTI DIP GO?

The 14.5 oz. liquid can will cover approximately 5 sq. ft. at 10 mils thickness. The 11 oz. spray will cover about 6 sq. ft. at 5 mils thickness.

WHY IS THE FINISH DULL?

Plasti Dip protective coating has a satin finish. If you are experiencing a cloudy or hazy finish, it’s likely caused by high humidity. Avoid these conditions or add approximately 5-10% naphtha to reduce the problem.

WHY IS THE PLASTI DIP SAGGING OR DRIPPING?

Dipping and removing too quickly can cause this. Remove at a rate of 1” every 5 seconds. If experiencing runs or sags when spraying, move can further away from the surface and apply a lighter coat. Sagging and dripping can also be caused by high humidity, high temperatures, windy conditions, or direct sunlight. Ideal conditions are low humidity, 16 degrees, little to no air movement in a well-ventilated area.

IS PRIMING NECESSARY?

Most items being dip coated do not require priming because the coating is shrinking around the item as it dries. However, in extreme conditions or when adding protective coating to a large metal surface, primer is recommended. Use Plasti Dip Primer or a high quality acrylic auto body-type primer. Do not use Rust-Oleum® primer as it is not compatible.

IS PLASTI DIP SAFE TO USE ON CHILDREN'S TOYS, ANIMAL CONTAINMENT, AND/OR ON KITCHEN UTENSILS?

Plasti Dip does not contain any heavy metals, and when completely dry, is considered harmless. However, it is not recommended that it be used on items that may be chewed or inserted into the mouth as it may present a choking hazard.

HOW THICK CAN I APPLY PLASTI DIP?

When following the directions, you can apply as many coats of Plasti Dip protective coating as you like. In most uses 10-12 mils thickness is adequate (2 dip coats, 3-4 brush coats, 4-5 spray coats). Greater thickness might be necessary for aesthetic reasons or in extreme cases.

CAN I ADD COLORANT TO THE PLASTI DIP AND MAKE A CUSTOM COLOR?

Mixing different colors of Plasti Dip protective coating can be done to achieve other colors. Your local hardware, home center, or paint store may also sell tubes of tinting colors. Add approximately 1/3 of a 1 oz. tube per 14.5 oz. can of Plasti Dip.

CAN PLASTI DIP BE USED TO REPAIR A DAMAGED DISHWASHER RACK?

While Plasti Dip has been used for dishwasher rack repair in the past, it is not recommended. Our ReRACK™ product is much better suited for this application and works very well.

IS PLASTI DIP CHEMICAL RESISTANT?

Plasti Dip protective coating has excellent resistance to acids, alkaline, and most common household chemicals. However, it is best to test this before going ahead with your application. Plasti Dip does have limited resistance to petroleum-based products.

CAN PLASTI DIP BE USED TO SEAL ELECTRICAL CONNECTIONS?

While Plasti Dip has excellent dielectric properties (insulates against shock), our Liquid Tape Electrical product is specifically formulated and conveniently packaged for this application.

CAN PLASTI DIP BE APPLIED TO PVC?

Rub acetone or fingernail polish remover in an inconspicuous area and apply Plasti Dip to test for success.

DOES PLASTI DIP CONTAIN POLYVINYLCHLORIDE?

Plasti Dip does not contain any polyvinylchloride or any other vinyl resins.

IS THERE ANY PRODUCT ON THE MARKET THAT CAN BE APPLIED OVER PLASTI DIP TO PROVIDE A GLOSSY FINISH?

Yes, the Plasti Dip Enhancer in the Glossifier™ formulation provides a glossy finish on cured Plasti Dipped items. Plasti Dip Enhancers are formulated to bond only with the unique chemical structure of Plasti Dip and are not recommended for use on other surfaces.

Our Retailers

Your customers continue to trust the highest quality, flexible rubberized coatings, sealants, and adhesives on the market today – only from Plasti Dip International.