Car Mirror

Car Mirror

Plasti Dip has many wonderful applications and uses. The automotive enthusiasts have taken the product and ran with it. Are you looking to change the look of your car? This side mirror was able to get a new look by using Plasti Dip.

What you’ll need to get started:

– Car Side Mirror
– Plasti Dip color of your choice
– Tape
– Well ventilated area


Spraying (11 oz. aerosol)
Surface must be clean and dry. For best results, avoid direct sunlight, high humidity or breezy conditions.
Shake can vigorously for one full minute after mixing ball begins to rattle. Shake often while applying.
Hold can 6-10” from the surface, moving can back and forth, slightly overlapping each stroke. Apply heavily enough to produce an even, wet appearance.
Allow 30 minutes minimum between coats. Apply as many coats as desired (3-4 average).
Allow 4 hours minimum dry time before use. Coverage: Approximately 5-10 sq. ft. per can.